Manual · Firmware 2.1.0 · Sep 4, 2026
Spagyros Manual
Firmware 2.1.0 (45ec286) · SDK 0.11.0·Three-slot stereo FX chain · browser-editable rack
This manual simulates having the module plugged in and accessed via the web programmer. You can view manual information in line with the controls, seeing everything in context. If you are developing for the SDK, use the manual hooks to embed this information in your firmware.
Plug in the module via the front USB port and these controls become live and bi-directional.
Module Introduction
Spagyros is a three-slot effects chain in series. Audio runs top to bottom through three rows, and each row holds one active effect drawn from a library you arrange yourself.
The panel exposes just two controls per effect: a depth and a parameter pot per row, one button to change that row's effect, and gestures for muting, automation, and recording. Everything about which effects are loaded, in what order, and how each one is tuned lives in this programmer.
IMPORTANT: YOU MUST SAVE YOUR CHANGES TO THESE PARAMETERS TO A SLOT (SLOT 0 FOR BOOT) OR THEY WILL BE LOST!
Play
Control
Manual
FX Rack
Signal chain
9 effects placed
Signal path
Row 1 · Top
3 / 6
DJ Filter knobs
Depth Cutoff·Param Resonance
Row 2 · Mid
3 / 6
Chopper knobs
Depth Rate·Param Duty
Row 3 · Bottom
3 / 6
Phaser knobs
Depth Depth·Param Rate
Presets
Save Slots
1Boot
Init
EditErase
2
Empty
3
Empty
4
Empty
5
Empty
6
Empty
7
Empty
8
Empty
9
Empty
10
Empty
11
Empty
12
Empty
13
Empty
14
Empty
15
Empty
16
Empty
A preset holds the whole rack: which effects are loaded in each row, the order the rows run in, every effect's settings, and the module's brightness. Sixteen slots, and the first one restores at power-up.
Saving and loading is a hold on the settings menu's action pot, or a click here. The module never saves on its own, so an arrangement you did not store is gone at power-down.